 |
 |
|
The Phoenix R175 Combines our Proven Performance into a compact, state of the art, roto-mold design. The R175 reflects all the ingenuity and engineering expertise that is expected in equipment that bears the Phoenix name.
Refrigerant: Standard Refrigerant, CFM: 230, Volts: 115, Running Amps: 6.1, Capacity: 21 gallons at saturation. Operating Range 33° - 105° , Automatic Pump-Out Height: 33", Width: 20", Depth: 20" , Weight: 105 lbs.
Efficient design results in the R175 removing 30% more water (92 pints at AHAM) than competitive LGR units of similar size, while drawing only 6.1 amps of power.
The new solid state control panel features a lighted hour meter, pump purge control and a defrost light. The sturdy telescoping handle provides sure control and retracts for storage. The recessed 12-inch wheels, compact design and balanced weight distribution make the R175 the most maneuverable dehumidifier in the restoration industry.
The rugged roto-mold housing resists dents and dings and the granite pigments hide scuffs and scratches The body also features chamfered corners to prevent damage to walls and woodwork while maneuvering on the job-site.
|
 |
|
|
 |
 |
 |
|
Phoenix 200 Max Refrigerant Dehumidifier
Refrigerant: Standard Refrigerant, CFM: 285, Volts: 115, Running Amps: 7.5, Capacity: 30 gallons at saturation. Operating Range 33° - 100° , Automatic Pump-Out , Rear Handle , and Rear Skid Plate Height: 41", Width: 24", Depth: 20" , Weight: 132 lbs.
PERFORMANCE: The Phoenix 200 MAX removes more water and has more grain depression than other refrigerant dehumidifiers while requiring less than 7.4 amps of electricity. Combined with this performance, the multiple ducting and air filtration options makes the Phoenix 200 Max the most effective and versatile drying device The high efficiency design of the Phoenix delivered substantially drier air,and was able to dry areas to much lower specific humidity levels than conventional dehumidifiers. High-Efficiency Design The term LGR (Low Grain Refrigerant) was created to describe the unique drying capabilities of the Phoenix 200 dehumidifier. Beginning with the original Phoenix 200 LGR, these units were known for delivering substantially drier air, as well as for drying areas to much lower specific humidity levels than conventional dehumidifiers. The Phoenix 200 MAX, an improved version of the original Phoenix 200, is the culmination of eight years of LGR manufacturing and design expertise.
|
 |
 |
 |
 |
 |
 |
 |
|
 |
|
|
|
Phoenix 200 HT The Phoenix 200 HT, High Temperature Performance
Refrigerant: Standard Refrigerant, CFM: 335, Volts: 115, Running Amps: 7.5 , Capacity: 32 gallons at saturation. Operating Range 33° - 125° , Automatic Pump-Out Height: 40", Width: 20", Depth: 21" , Weight: 138 lbs.
The Phoenix 200 HT features patent pending technology that results in superior high-ambient temperature performance (increased water removal up through 120°F). In addition to the high temperature improvements, the Phoenix 200 HT meets or exceeds the performance of the original Phoenix 200 MAX under normal conditions.drying at higher temperatures speeds the evaporation of moisture in the structure when compared to cooler temperatures.
The Phoenix 200 HT features downward focused exhaust airflow which direct heat toward the floor, a raised based that improves drying directly under the dehumidifier, recessed condensate hose, in-board wheels, increased airflow with higher static pressure and an improved skid plate design.
|
|
|
|
 |
|
|
|
Phoenix 300 Refrigerant Dehumidifier
Refrigerant: Standard Refrigerant, CFM: 540, Volts: 115, Running Amps: 12, Capacity: 38 gallons at saturation. Operating Range 33° - 100° , Automatic Pump-Out Height: 46", Width: 29", Depth: 25" , Weight: 175 lbs.
PERFORMANCE: The design goal of the Phoenix 300 was to build a dehumidifier that would maximize the water removal capacity from a single 110 volt, 15 amp circuit. In order to be a viable product, they had to house this high capacity dehumidifier in a portable cabinet of manageable size and weight. They also kept in mind the fine reputation the Phoenix 200 had earned, and knew that the 300 would have to be able to live up the Phoenix name. We hope you are not only pleased, but amazed at the performance of the Phoenix 300.
|
 |
|
|
|
MODEL
|
CAPACITY
|
AMPS
|
CFM
|
PUMP OUT
|
PRICE
|
4-9
|
10+
|
|
Phoenix R175
|
21 Gal
|
6.1
|
230
|
Yes
|
$1,749.00
|
$1,640.00
|
$1,530.00
|
|
Phoenix 200 Max
|
30 Gal
|
7.4
|
285
|
Yes
|
2,169.00
|
2,033.75
|
1,897.00
|
|
Phoenix 200 HT
|
30 Gal
|
7.4
|
335
|
Yes
|
2,299.00
|
2,158.00
|
2,011.25
|
|
Phoenix 300
|
38 Gal
|
12
|
540
|
Yes
|
3,449.00
|
3,233,75
|
3,017.00
|
|
Filter Pleated
|
24 x 24
|
|
|
|
|
|
|
|
Filter Pleated
|
20 x 20
|
|
|
|
|
|
|
|
|